4-Channel RF Transmitter & Receiver Set (Great For Access Control)

The Very Best High Security Remote For Access Control

This set includes one each ultra secure CODEBUMP Code-Hopping technology receiver and transmitter. Patented CODEBUMP™ Technology - Be prepared for today's thieves with SECO-LARM's patented CODEBUMP™ technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.

The Receiver:
Controls home automation functions, garage doors, alarm panels, etc., from up to 500 ft. Compatible with all SECO-LARM transmitters. Mode switch for easy programming. 4 LEDs, one per channel, indicate RF reception, learn mode, transmitter cleared, output type. Add optional plug-in extended range antenna: SK-91ERSD or SK-91ERSW.

Use to control home automation functions, electric locks and strikes and magnetic locks, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control. Patented CODEBUMP anti-codegrabbing technology. External extended range antenna optional. Plugs directly into receiver PC Board. If used, range will be up to 1200 feet. Mode switch for easy transmitter learning. Easily Code-learns up to 15 remotes per channel. Stores codes safely in EEPROM for up to one year in case of power loss.

Four Form-C Dry Relay Contact (N.O./N.C./Common) Outputs. Each output rated 10 Amps at 24 VDC. 4 Separate Channels / 4 Output Modes Each: a. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.) b. Toggle (On/Off) c. Latch (Output stays on until manually reset) d. Continuous or Validity (Output for as long as signal is received)

All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.) Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second. Four LEDs (One LED for each channel) to indicate RF reception, learn mode entered, transmitted learned, memory cleared. Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation. In addition, these revolutionary receivers have: Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals. HIGHER SENSITIVITY for greater operating distances. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.

•500 ft. Range
•All outputs are independently controlled.
•Four Form-C Dry Relay Contact (N.O./N.C./Common) Outputs.
•Easily Code-learns up to 15 remotes per channel.
•Stores codes safely in EEPROM for up to one year in case of power loss.

Size:
5.31" x 4.33" x 1.1" (135 x 110 x 28 mm)
Model secsk91094

The Transmitters:
•Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter waterproof.
•Gold-plated battery clips and contact points extend the life of the transmitter.
•Magic LED Only appears when buttons are pressed.
•Frequency: 315 MHz.
•Over 68 billion (6.8 x 1010) possible codes.
•Operates up to 500 feet (150 meters).
•RF anti-scan protection.
•Compatible with all SECO-LARM receivers (SK-910R, SK-910R2, SK-910R4).
•Includes 3VDC lithium battery Size: 2 inches x 1.25 inches x .5 inches or 51 x 32 x 11 mm
Model secsk917t4j


Related Products
See our electric strike section
See our electric lock section


Don't forget the power supply! Click here for power supply with battery back-up