| |
 |
  
 WEATHER-PROOF
Unlike some other touch button systems we have seen you do not need a seperate module to make this work.
The picture on the left is the standard size reader. The reader
head is mounted on a standard size plate. The picture on the right
is of just the reader head with the two wire leads. (The Head is available
by itself. Please call for price). The head can be
mounted almost anywhere for an almost invisible installation! It looks a bit like a bell button.
This system works as follows: A small reader is mounted
outside the door, usually on the frame, and the user touches
the reader with a small button-type key to activate it. When the correct key is presented to the reader, an LED flashes and the lock is activated.
The opening time is easily adjustable. All it takes is a very light touch, and position isn't
critical--so these systems are great for people with weak
hands or those who find it difficult to insert and turn a key.
•A chip reader system is extremely difficult to bypass. The
only way to activate the chip in the little key, is to
have it contact the correct reader.
•The little chip keys
are very inexpensive and they can be reused many times.
•Programing a small system is very easy and takes just
a few minutes. No special programmer or tool is needed and
it programs right at the reader.
More on Data Chips or ibuttons:
Corby Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister.
This superior design allows the Data Chip to be easily attached to any smooth surface including existing photo ID cards, badges, or keychains.
Innovative packaging protects the electronic circuits inside the canister from dirt, moisture, corrosion and static discharge.
Touching a Data Chip to the reader instantly transfers a 46 bit data stream of digital data which allows the user access to a secure area. Unlike
keys or other security cards, the Data Chip is user-forgiving... it doesn't need to be precisely aligned to transfer its digital data.
Don't forget that this is only part of a system. Along with
the chip reader, you'll also need a lock of some type. Usually it's
an electric strike or magnetic lock Often an intercom will
be part of the system too. If you will need an intercom, we
recommend and sell the Aiphone brand. This company manufactures excellent intercoms at reasonable prices. See the associated equipment page.
This is a very small reader.
This system comes with two chip keys. See below to order more.
This is a basic and easy to use and easy to program system and very easy to install. Unlike some other chip key reader systems on the market, this one includes the outside reader and the inside module. Great
if you need a system for just 17 or less seperate users (such as a small apartment building or dorm) and each user can be added or deleted in
seconds
By leaving out some features that may not be needed (see below for more advanced systems)
this system offers advanced technology at a great price.
Features:
•2 part system - Sensitive electronics are installed inside protected area
•10-14 VDC Operation
•Weatherproof Reader
•Up to 17 Different Users
•Can Interface with a Printer
•Heavy-Duty 5amp Relay
•Momentary or Latching Relay
•Stainless Steel Reader
•Unlimited Users Mode
•Request-To-Exit Input
•LED Driver Circuit
•Chip keys can be re-programmed unlike regular keys
•The special Printer Output can send System activity data to an optional Keypad Control
Center.
•Very small Reader - can be installed just about anywhere and on any type of surface
Size:
Ultra slim design can be mounted almost anywhere - only 3.125" High X 1.375" Wide
Power requirements:10-14 VDC
This basic systen can be ordered with either the regular plate or the thin plate or no plate
(just the reader head). Call if your not sure which one you need.
Related Products
See our electric strike section
See our electric lock section
Don't forget the power supply! Go here
Or a power supply with back up battery system
Go here
Please note: The reader comes without keys. The little Corby Chip keys can be ordered below.
![We have found this manufacturer to be very supportive to the end user. They represent the very best and if you have a problem with one of their products they will do whatever it takes to correct the problem](http://us.st11.yimg.com/us.st.yimg.com/I/853111_1830_1016539.jpg")
We have found this manufacturer to be extremely user friendly !
|
|  Same Corby Reader But With
Wide PlateSingle-gang, flush mount plate - Up to 17 Users.
Please note: The reader comes without keys. The little Corby Chip keys can be ordered below.
| | |  Corby Chip KeysThese are the little keys. Notice that here the button is
fastened to a little fob so it can be carried on a key-ring,
but it can really stick to anything. They can be reused
and are easy to program.
| | | | |
We do not now and never will give or sell
any information you have given to us. Period!
![](http://us.st11.yimg.com/us.st.yimg.com/I/853111_1584_152383.jpg"<br)
![We take these credit cards](http://us.st11.yimg.com/us.st.yimg.com/I/853111_1783_1593278.jpg")
We also accept Paypal for US orders to confirmed addesses only.
![](http://us.st11.yimg.com/us.st.yimg.com/I/853111_1606_231244.jpg") We are proud to be
A top rated store!
Phone: 561 479-0498
Fax: 781 459-0498
Skype: nokeycom
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978
|
|
| | |
