The MM-300N miniature magnetic lock can be supplied
with face mount or top side attachment holes. When
locks are top mounted, security head screws must be
used. On face mounted locks, the screw heads are not
accessible when the lock is secured to the armature
and typically do not require tamper resistant screws.
Flying leads extend from the MM-300N housing at one
top corner. Wires must be concealed and protected by
the installing contractor as required.
Size:
Housing 6" long x 1 1/4" high x 7/8"
deep overall
Armature 5" long x 1" wide x 1/4" thick
Voltage:
160 ma @ 12 VDC
All Dortronic Magnetic locks come with a Full Lifetime warranty
Related Products
Fingerprint readers
Card readers
Digital keypad system
Chip Reader
Proximity card Reader
Multi Door Proximity Access Control
Receptionist unlock button
Wireless Electric strike controller Dont forget the power supply! Heavy duty power supplies with backup
batteries are highly recommended for magnetic locks
Power Supplies![We have found this manufacturer to be very supportive to the end user. They represent the very best and if you have a problem with one of their products they will do whatever it takes to correct the problem](http://ep.yimg.com/ca/I/853111_1830_1016539.jpg")
We have found this manufacturer to be extremely user friendly !
![We take these credit cards](http://ep.yimg.com/ca/I/853111_1783_1593278.jpg")
![](http://ep.yimg.com/ca/I/853111_1606_231244.jpg")
We are proud to be
