| |
 |
  
 Click the small picture for more information.
The lock in the picture on the left is for regular mounting for out-swing doors. The lock on the right is for an in-swing door. All Dortronic heavy duty mag locks come with the the correct harware for the type of installation your doing. The out-swing door models will come with the lock, armature and thin adjustable mounting plate. The in-swing models come with the lock, armature, top angle mounting and plate and Z bracket.
Interior or Exterior Applications
The 1000 Series electromagnetic locks can be used in harsh environments to secure doors and gates . All electronics are sealed in epoxy and are protected by the steel housing cover. The housing armature and exposed face of the electric lock are nickel plated to resist rust and corrosion. A rigid conduit fitting can be provided on one end of the lock to protect power wiring in gate control installations.
Fail-Safe Operation:
All Dortronics electromagnetic locks are fail-safe, releasing instantly upon command or loss of power. There are no moving parts to wear, stick or bind. Without any bolt travel time or possibility of misalignment to raise concern, both locking and unlocking are accomplished with ease and efficiency.
Extended Service Life:
The rugged design and durable construction of this lock assures virtually unlimited actuations without fear of electrical fatigue or mechanical breakdown. Proudly made in the USA, a lifetime warranty is provided by Dortronics Systems on all electromagnetic locks.
Universal Mounting:
The standard #1000 model is supplied with an adjustable mounting plate for use on outswing doors. The #TJ-1000 unit is furnished with an angle lock mounting plate and an armature "Z" bracket for inswinging door installations. Any 1000 series lock may be converted in the field for inswing door applications by adding the angle mounting plate and "Z" bracket. An optional conduit fitted lock is available for exterior gate control applications.
Low Current Draw:
All 1000 series locks can be operate on either 12 or 24 VDC. The efficient design of these locks requires only 170ma. at 24 volts DC to maintain the rated 1200 pound holding force.
The well confined magnetic field combined with the built-in spike and surge suppression system of these locks, allow integration with any access control system. Able to be controlled individually or simultaneously from one or several locations make the use of these locks ideal for securing manual or automatically operated doors and gates.
Related Products
Fingerprint readers
Card readers
Digital keypad system
Chip Reader
Proximity card Reader
Multi Door Proximity Access Control
Receptionist unlock button
Wireless Electric strike controller
Dont forget the power supply! Heavy duty power supplies with backup
batteries are highly recommended for magnetic locks
Power Supplies
All Dortronic Magnetic locks come with a Full Lifetime warranty
![We have found this manufacturer to be very supportive to the end user. They represent the very best and if you have a problem with one of their products they will do whatever it takes to correct the problem](http://us.st12.yimg.com/us.st.yimg.com/I/853111_1830_1016539.jpg")
We have found this manufacturer to be extremely user friendly !
|
|  Dortronics 650 Pound Mag LockPhysical Size: 8-1/2"long x 2" high
x 1-13/16" deep overall
Projection-2-5/8" total
depth including armature
Electrical:
Operating voltage field selectable
1106-245ma @ 24 VDC
480ma @ 12VDC 1115-290ma @ 24 VDC
580ma @ 12 VDC
model 1110
| | |  Dortronics Split Armature Maglock For Double DoorsFor double doors
| | |  Dortronics 1200 Pound Gate Magnetic LockThis magnetic gate lock is supplied with a 4-conductor, 20 gauge power cable (equal to Belden #M-8444) 18" long. By the order in which these leads are connected to the DC power source, the operating voltage of the unit is determined. This allows any of these locks to be used with a 12 or 24 volt DC power supply.
Gate mounting:
1000xCF Specifies Conduit Fitting. When installing these locks on exterior swing and slide gates, # 1000xCF locks should be specified to receive units with the conduit fitting. This will afford protection to the power wiring for the lock. This lock comes with a Z bracket that can come in handy for some installations.
Dual Voltage: will work with 12 - 24 dc
Specifications:
Physical Size:
#1000 Lock - 8-1/4" long x 2-9/16" high x 1-1/2" deep
#1000 Armature-6-1/2" long x 2-1/4" high x 5/8" thick
#1000 Mounting Plate - 8-1/4" long x 1-1/2" wide x 1/4" thick
Electrical:
170ma@24 VDC
340ma@12 VDC
Related Products
Fingerprint readers
Card readers
Digital keypad system
Chip Reader
Proximity card Reader
Multi Door Proximity Access Control
Receptionist unlock button
Wireless Electric strike controller
Dont forget the power supply!Click here
Or a power supply with back up battery system
Click here
All Dortronic Magnetic locks come with a Full Lifetime warranty
We have found this manufacturer to be extremely user friendly !
| |
We do not now and never will give or sell
any information you have given to us. Period!
![](http://us.st12.yimg.com/us.st.yimg.com/I/853111_1584_152383.jpg"<br)
![We take these credit cards](http://us.st12.yimg.com/us.st.yimg.com/I/853111_1783_1593278.jpg")
We also accept Paypal for US orders to confirmed addesses only.
![](http://us.st12.yimg.com/us.st.yimg.com/I/853111_1606_231244.jpg") We are proud to be
A top rated store!
Phone: 561 479-0498
Fax: 781 459-0498
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978
|
|
| | |
