Heavy Duty Electronic Cabinet Lock

This compact and superior electric lock allows controlled access to very small enclosures and light weight doors. The once optional monitoring switch is now included to indicate whether the mechanism is locked or unlocked. Positioning of the locking pin determines lock mode. A simple twist of the pin (by hand) changes the lock from fail unlocked to fail locked during installation. Four countersunk mounting holes are provided to securely mount the lock and pin. This lock is designed with a special mechanism to gently hold the door or drawer in the closed position even when unlocked. Therefore, additional mechanisms used to keep the drawer or door closed such as magnetic latches are not required. In other words, it has the ability to latch closed without locking. This lock can be used in single or multi cabinet installations. By using one of our multi door proximity systems you'll be able to tie many cabinets together and do your programming and download audit trails into a PC. Can be used for installations where nothing else would work so be creative! Now includes latch monitoring if needed. The monitoring switch is used to indicate whether the mechanism is locked or unlocked. The monitor switch (MS), indicates whether the Cabinet Lock is locked or unlocked. It has 3 outputs. a.) 5 - normally open b.) 6 - normally closed c.) 7 - common 2. Monitor switch contacts are rated 1Amp @ 24V maximum.



Great features!
• Surface-mounted compact electric lock
• Field selectable 12 or 24 Volt, DC - Continuous duty operation. Current draw .25 amps.
• Zinc-plated (rust-resistant) steel locking mechanism
• 200 lbs. holding force
• Low energy consumption
• Black finish
• Change from fail unlocked to fail locked in one second!
• Lock monitor. Detects the position of the locking bolt

A P P L I C A T I O N S
• Use with Proximity readers for audit trail output. • Filing cabinets • Bi fold doors • Cash drawers • Drug cabinets • Showcases • Jewelry cases • Key cabinets • Vending machines • Machine access covers • Desk drawers
U S A G E
• Retail • Government • Health Care • Institutional • Commercial • Residential • Be creative!





Size:
1-7/8” High X 1-5/8” Wide X 13/16” Deep - (48mm x 42mm x 20mm)


Please note: A small jewelers screw driver is needed to make a wire connections to this lock


Related Products
Fingerprint readers
Card readers
Digital keypad system
Chip Reader
Proximity card Reader
Multi Door Proximity Access Control
Receptionist unlock button
Wireless Electric strike controller
Knocklock (Great for hidden book cases)


Don't forget the power supply with back up battery system Go here



Minimum wire gauge requirements:
200 feet or less 12v ac/dc or 24v ac/dc - 18 gage
200 - 300 feet 12v ac/dc 18 gage or 24v ac/dc - 16 gage
300 - 400 feet 12v ac/dc - 18 gage - 24v ac/dc - 14 gage