IEI Magnetic Swipe Card Reader

This mag stripe card system is easy to install and program. Programming of cards is done with a separate digital keypad that installs inside the protected area for extra security.

•Weatherproof metal housing but should be sheltered away from the elements
•Two piece system so secure electronics remain inside protected area
•Narrow style so can be mounted on narrow aluminum door frames
•Uses any track 2 type (the most common like credit cards) magstripe card
•4 relays total
•Up to 120 user capacity
•Non volatile eeprom memory is retained for 5 years
Lock release relay may be set as toggled or timed from 1 to 90 seconds
•LED guidance makes programming easy and changing cards a matter of secondsfor an authorized user.
•Vestibule/ATM mode: set in this mode will allow any track 11 encoded magnetic stripe card to energize either the propped door relay, the forced door relay or both. This function is especially useful when allowing access to a vestibule or automatic teller machine. A new command has been added that will energize the selected relay even if the card is not swiped properly.


Criminals please note: This item can not be used to grab credit card information. It can only take a small amount of information that's imbedded in the magnetic strip built into the card, and only use this for access purposes. This device cannot be used to illegally grab credit card numbers or information.

Power:
Takes 12 vdc power


Temperature:
-20 F to 130 F (-28 C to 54 C)


Outputs:
Main relay: 8 amp form -c at 24vdc - 10 amp surge max
Alarm zone shunting relay: 1 amp form -c @24vdc
Forced door relay: 1 amp form-c @24vdc
Propped door relay: 1 amp form-c @24vdc

Please note we have seen older models with many less features being sold on the internet as new models.

Reader dimensions:
1.75”w x 4.50”h x 1.55”d

Don't forget the power supply! Go here
Or a power supply with back up battery system Go here