Each set of 4 locks comes with 2 master overide keys!

Combination Lock with Key Override. No reason to worry if the combination gets lost!

The new Ultra combination lock with key override and code retrievable capabilities offering convenient keyless access. The secure heavy duty die-cast metal cam lock replaces any ¾” standard cam lock with 10,000 possible combinations. Combi-Cam Ultra, a combination door lock with key override, offers high security, pick resistant keyways with over 50,000 possible key codes. The dual access lock with key override is user friendly – turn knob to open with no bulky housing to twist defacing surfaces.

Combi-Cam Ultra, combination cam lock with master key override and code retrieval capabilities. Here are the benefits of our lock:

Code discovery -- While some dual access locks have key override, if the combination is lost, it cannot be recombinated. Combi-Cam Ultra can be recombinated with both models.

High security keyway -- over 50,000 key codes available on Combi-Cam Ultra vs low security wafer keyway.

Utilizing cam -- Combi-Cam Ultra utilizes the knob to actuate cam, while our dual access locks require the twisting of the entire housing potentially defacing the surface.

Cylinder lengths -- Combi-Cam Ultra is available in 5/8", 7/8", and 1-1/8" cylinder lengths

Easy to read dials -- large dials on Combi-Cam Ultra with no confusion (which row do I use) like other dual access locks

More user friendly -- clearly marked open and closed mode. Other dual access cam locks must first set combination, then push in button while twisting the lock. None of which is indicated and is confusing.

More price competitive

More flexibility in applications -- our entire housing does not rotate which means that our product can be used in a wider variety of applications. As an example, a drawer scenario where the desktop overlays above the drawer means potentially that the other lock's housing cannot be rotated without hitting the desktop overhang.

Very Secure!

10,000 possible combinations (#7432)

1,000 possible combinations (#7440)

Master key access

Dual access – keys and combination

High security tubular keyway

Heavy duty metal construction

Very Easy to Use!

Set combination in 3 easy steps

User friendly with easy to read dials and open and close indicators

Flexibility of combination retrieval or multiple person access

Can be installed vertically or horizontally

Retrofits any ¾” standard cam lock

Easy-to-use knob with no need to twist bulky housing defacing surface

Cam can be placed in 180 degree or 90 degree increments (with dual hole cams)

There's More!

Can override the current combination with the master key, or retrieve the current combination

Ideal for locker applications, cabinets, drawers, storage, etc. – anywhere needing flexibility of combination retrieval or multiple person access

The Ultra lock with key override is available in three cylinder lengths (5/8”, 7/8”, and 1-1/8”) and fits a maximum material thickness of 1-1/8”. The combination lock with key comes with a 90 degree stop cam, 1-3/8” straight cam, ¾” cylinder nut and screw, and nut washer. Additional cams, finger pull, and metal locker handle available upon request.


No battery needed for these locks!



There have been a lot of questions about this product so the following FAQ should help:

(1) Does it matter which direction the cam is installed?

The new Ultra gives you the flexibility to install the cam in 90 degree increments with our two hole cams and 180 degree increments on our single hole cams allowing you to be flexible for any installation scenario.

(2) How do I set my combination to my own code?

The combination can be set at any time just so you are on the current opening combination. Simply hold down the top button while turning the dials to your desired combination.

(3) My employee lost their combination! How do I bypass the combination and reset the lock to another combination??

You can retrieve the current combination with the master key. With the #7432 combination cam lock, you use the retrieve pin on the back of the lock to find the current combination. With the #7440 combination cam lock, you use the master key to find the current combination.

(4) Can the cam lock be installed horizontally or vertically?

Yes, The Ultra can be installed both horizontally or vertically for flexibility.

(5) Why is the code retrieval function so important?

The code retrieval function is very important! If you or your staff member/student forget their combination, you can use the master key/retrieval pin to find the current combination & then reset the combination. Most combination locks either have no way to find the current combination or you are only able to use the master key to open the lock when you forgot your combination. The code retrieval function allows you to continue using the lock and not throw it away!

(6) What is the warranty on the Combi-Cam Ultra?

The new Ultra has a one year warranty which does not include forgotten combinations.

(7) What material thickness do these locks work with?

7432L / 7440L with 1-1/8" cylinder = material thickness up to 7/8"

7432M / 7440M with 7/8" cylinder = material thickness up to 5/8"

7432S / 7440S with 5/8" cylinder = material thickness up to 3/8"

(8)What is the difference between the 7432 and the 7440?

7432 7440 10,000 combinations 1,000 combinations Code retrieved from the back of the lock with the code retrieve pin Code retrieved by turning the key to the right and rolling the dials until the stop on the combination Normal size dials with black on nickel Larger dials w/ white letters on back

(9)Why is the new Ultra the best choice as a combination lock with key override?

- More competitive price - Better quality product - Higher security product - Far easier to use and reset combination - Only lock where combination can be retrieved with master key - Minimal rotation- whole housing does not rotate defacing surface, just the knob that actuates the cam. - Easier to read dials