The ENFORCER “No Touch” Request-To-Exit Plate uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this plate is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices. Weatherproof for outdoor applications.
Weather-resistant (IP65) for outdoor use
Clean and simple no-touch operation reduces the risk of cross-contamination
Adjustable sensor range up to 4” (10cm)
Stainless-steel plate, available in slimline or single-gang
1A relay, adjustable trigger duration 0.5~20 seconds
Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated
Unique manual override button functions without electricity in case of power failure.
Operating Voltage - 12~24 VDC
Current Draw - Standby 16mA@12VDC / 25mA@24VDC
Triggered - 20mA@12VDC / 32mA@24VDC
Relay Type - Form C dry contact, 1A@30VDC
Response Time - 10mS
LEDs - Standby Red*
Triggered - Green*
Output Time - 0.5~20 s, toggle
Range - 2"~7" (5~18cm)
IP rating - IP65
Operating Temperature - -4°~131° F (-20°~55° C)
Dimensions - Single-Gang 41/2"x23/4"x11/2"" (115x70x39mm)
Slimline - 41/2"x11/2""x11/2" (115x39x39mm)
*Colors are reversible.