Two channels and two buttons to control two devices!
Garage Door Opening
Arming & disarming of alarm systems
Eliminating the need for old-fashioned wiring from the push button to the transformer and
strike, they can be used with many low voltage devices, such as electric strikes, electro magnetic locks, and garage door openers. Multiple transmitters
can be used with just one receiver. Very easy to install and set up.
This is a set for one digital coded transmitter and receiver. You can order extra transmitters.
This is an example of a typical installation.
Two 5 Amp Normally Open and Normally Closed Contacts
Relays can be coupled to work simultaneously or individually by the 2 button tiny remote
Very small (2 1/4 inch X 1 1/2 inch) keychain remote comes with a battery and belt clip - use as many as you want! See below for extra transmitters
Built in 5 to 45 second time delay for unlocking time of the electric strike or mag lock
Very easy to adjust time delay. One knob for each channel.
Will take any voltage between 12 to 24 DC or AC but AC may lessen it's sensitivity
6,561 security codes
3 amp contacts - either NC or NO
Can be wall mounted
Up to 200 feet (on a good day) operating range (Environment dependent). More typically 50 feet. Experimenting with receiver placement can increase range many times.