|
 |
UCA Heavy Duty Electronic
Pushbutton
Latch Lock With PC
Programming And Audit
Trail Capability
 With this new heavy duty lock you can pre enter codes that are effective for only specific time periods or dates. This can be done with either PIN numbers (codes) or with optional ibuttons (Dallas Chips).This is a very handy feature for rentals. The ultimate renters lock and no recurring monthly fees! Can be used with or without optional software and PC cable. Please note: The optional software pack is for downloading audit trails and easy and more extensive programming.
One of the best features of this lock is that
it can be set to a passage mode where no code is needed to open the door, then easily be locked again, with the touch of just one button (see picture just below).  Inside view 
General Features
:
Extra heavy duty for heavy usage
Very compact design. No other electronic lock has a smaller foot print
Access Type: iButton or Keycode or Dual Access
Glow in the dark touchpad
Set Up Method: Use Function Code to setup user from Keypad
Light up keypad
User Capacity: 300 user capacity either ibutton or pin codes, any combination or 1000 when using the lock with the optional sofware package
Auto Lock Function: Set the lock to automatically lock at preset time
Storeroom Mode or Classroom Mode - always locked on the outside and always free to unlock from the inside
User time lockout: Optional set time restricted user
Choose either model Type: Software version and non software version.
Set time restricted user - you control the time and date any user can unlock with eith the software or non software model.
Unique quick lock feature - if the lock is in the passage mode (unlocked), you can quickly put it back in the lock mode with the large button on the inside of the lock.
Hardware Features:
Comes with one free iButton (More can be ordered at any time - see options below)
Keypad - 12 numeric buttons
Handle (Lever): Easy to reverse for left or right hand installations
Power Supply: 4 standard AA batteries
Battery Life Expectancy: 10,000 operations, low battery warning when system drops below 4.8 volts.
Finishes: Only Stainless Steel for now.
Handles: Lever type.
Key Bypass: Standard on all units
Door Preparation: Standard and easy 2 1/8 inch diamter ANSI A115 Series Prep, modified by adding additional 5/8” through-bolt holes to add stability to the lock and increase security.
Strike Plate ANSI Standard 115.3. 1-1/8 x 2-3/4 inch T strike with 1-1/4 lip-to-center dimension.
Choose either 2 3/4 inch or 2 3/8 inch backsets with 1/2 inch throw. A standard one inch diameter bore is required.
Each Lock includes 2 keys (Schlage type C 6 pin keyway)
Materials: Tough Zinc Alloy
Working temperature: 0°F-120°F (-18°C-50°C) -
Exposure to All weather conditions are OK but inside part of the lock should not be directly exposed to the weather.
Can be used on door thickness of 1 3/8" to 2"
Dual backset heavy duty latch. User adjustable between 2 3/8 to 2 3/4 inches.
Program Features:
Keypad Functions:
Temporary codes, Permanent codes
Memory Retention Flash memory never loses memory even without power.
Programming / Communication Method iButton program key, no annoying wires.
iButton Functions Time zones for lock function (automatically unlock or lock), fully programmable exception dates (holidays), temporary dates, and time zones for iButton key users.
IButton User Capacity 500.
Anti-tamper Red-warning light stays on for 60 seconds after 3 invalid entries
1 Year No Hassle Manufacturer's Warranty
The Lock
More on Data Chips or ibuttons:
Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister.
This superior design allows the Data Chip to be easily attached to any smooth surface including existing photo ID cards, badges, or keychains.
Innovative packaging protects the electronic circuits inside the canister from dirt, moisture, corrosion and static discharge.
Touching a Data Chip to the reader instantly transfers a 46 bit data stream of digital data which allows the user access to a secure area. Unlike
keys or other security cards, the Data Chip is user-forgiving... it doesn't need to be precisely aligned to transfer its digital data.
 | UCA Extra iButton Programming Keys (Only For Programming)! Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister. This superior design allows the Data Chip to be easily attached to any smooth surface including existing photo ID cards, badges, or keychains. Innovative packaging protects the electronic circuits inside the canister from dirt, moisture, corrosion and static discharge.
Touching a Data Chip to the reader instantly transfers a 46 bit data stream of digital data which allows the user access to a secure area. Unlike keys or other security cards, the Data Chip is user-forgiving... it doesn't need to be precisely aligned to transfer its digital data. This ibutton is not to be used as as a "user key". It's only function is for programming the UCA locks.

|  |  | UCA Programming And Audit Trail PC Software And Cable Package Comes with USB connection

|  |  | More Info Including Installation Instruction And Diagrams On This Product In The Word Format
|  |  | More Info On This Product In The PDF Format
|  |  | UCA Extra Ibutton User Keys For Key-Chain Mounting 
Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister. This superior design allows the Data Chip to be easily attached to any smooth surface including existing photo ID cards, badges, or keychains. Innovative packaging protects the electronic circuits inside the canister from dirt, moisture, corrosion and static discharge.
Touching a Data Chip to the reader instantly transfers a 46 bit data stream of digital data which allows the user access to a secure area. Unlike keys or other security cards, the Data Chip is user-forgiving... it doesn't need to be precisely aligned to transfer its digital data.

|  |
|


We also accept Paypal for US orders
and now also international orders through our International Checkout.
We are proud to be
A top rated store!
Phone: 561 479-0498 or 877 665-3926 Fax: 781 459-0498
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978

|
|
|  | |