Electronic RFID Locker Lock
Our 2154/2155 Electronic RFID Locks are some of our most secure and versatile electronic locks. They have been engineered to work on all standard metal single point, box locker, gravity latch/multipoint, phenolic, and wood laminate lockers. Furthermore, they are designed to meet the same security levels as used in Banking Smart cards, comply with all ADA guidelines for ADA accessibility, and can be used in a variety of applications.
Unique card key with same security level as used in banking Smart Cards
Complies with ADA guidelines for ADA accessibility
Engineered to work on all standard metal single point, box locker, gravity latch/multipoint lockers
Ideal for wood, phenolic, plastic and laminate lockers
Supervisory access and override with control and management cards.
Programmable for both shared use and permanent use
High impact polycarbonate housing
Audit trail allows facility to track user history
New user cards available in the event card is lost
Battery Powered; Requires (4) AA batteries offering life cycle of 10,000 – 20,000 uses depending on programming.
Low battery audible warning signal
External battery powered emergency device offered to allow access to lock if low battery signal is missed and battery life ends
1 year warranty from the time of shipment
Available for use on right-hinged locker door (2154) or left-hinged locker door (2155)
Extension kits for mounting on 1/2″ or 3/4″ material
RFID access through cards, mini cards, key fobs, and wristbands
•Athletic, student & swimming facility lockers
•Health, fitness, golf & country clubs, day spas, wellness centers; hotel & resort lockers
Each lock includes batteries, 1 user card and 1 control card.
How to install?
Electronic RFID Locker Lock System
1.) Tools required: 3/8” nut driver. Warning: If using an electric screw gun equipped with a torque
adjuster, torque setting must be very low. Otherwise, damage may be caused to the lock.
2.) Included Components:
2 - Locking Nuts
1 - Rear unit
1 - Front Unit
Front of Unit
Rear of Unit
3.) Locate the 3 lock mounting holes on the locker door. If blocking plate is attached, remove to
expose mounting holes.
4.) Insert the threaded stems of the front unit through the lock mounting holes on the front of the door.
5.) While holding the front unit against the front of the door, place the rear unit against the rear face of the
door aligning the mounting holes with the mounting screw posts from the front unit. Do not pull connecting
wire out of lock body.
6.) Slowly press the front unit and rear unit together making sure that the connector on the rear unit
stands straight and aligns with the pins of the front unit.
7.) Attach the locking nuts over the threaded stems and tighten to secure the lock to the door. (Do Not Over tighten)
8.) If mounted properly, lock will beep once, pause, and play the 4 beep melody. Test the operation
several times while the door is open. Close the door and test the unit again. Make sure there
is no binding between the bolt and the door strike plate and /or frame. Adjust the locker if necessary.
9.) To assign User Cards, press center button on lock, then touch blank User Card to front of lock.
A green light indicates that the User Card has now been assigned to that lock.