The ELK-9200 is a Heavy Duty Relay/Contactor
inside a lockable metal enclosure. It is designed for
allowing remote control of high current devices such
as electric water heaters, pumps, motors, gates,
etc. It features dual (two pole) relay contacts, each
rated for switching up to 30 Amps of AC current.
The energizing coil of the 9200 is 110 VAC and
comes prewired with a three (3) prong plug-in cord.
This plug is compatible with virtually any appliance
style automation module (purchased separately).
Examples include: UPB, Insteon, ZWave, Zigbee,
X10, etc. A simple remote command sent to control
the appliance module will then control the coil of
the 9200 relay, allowing higher current devices to
be switched through the contacts of the 9200 relay.
This permits the safe and easy On/Off switching of
a 110VAC or 220VAC device drawing up to 30 Amps of total electrical current.
Pre-Wired Terminal Lugs for easy Installation.
110 VAC Plug Cord for Energizing the Relay Coil
Heavy Duty "Lockable" Metal Enclosure
Relay Suitable for a 110 VAC or 220 VAC Load
Ideal for Water Heaters, Motors, Pumps, etc.
Heavy Duty "UL Recognized" Relay
Operating Coil Voltage: 110 VAC
Coil Current Draw: < 35 mA
Two Pole Relay Contacts rated for 30 Amps AC (combined maximum
of 30 Amp total current)
Metal Enclosure Size: 12" x 12" x 3.375" * Not suitable for wet locations.