ZK RFID Proximity Card Reader/Keypad
Please note that this reader is no longer made but we still have some cards and fobs. See below.
This new innovative and elegant looking RFID card
reader and keypad is an access control reader that can be installed standalone with it's relay output to any electric strike or magnetic lock or with any third party access panel that supports 64-bit Wiegand.
This card reader can be installed so it has a full time connection to a PC or network using ethernet or 232 serial or USB (Built in Serial and Ethernet ports and USB - all included! and can also be used completely stand alone so only a flash card is used to bring info to and from the reader.
This Prox reader conveniently reads standard
proximity cards and fobs, HID* cards as a Special order - (please call for this).
The user will benefit from their unparalleled performance using
the state of the art proximity reader and embedded Linux
The included (downloaded) management software is Windows 7 compatible.
Relay output to control any elctric strike or magnetic lock
Little prox stickers or buttons now availabe - see options below to order.
Flash card and go system is highly accurate, reduces
maintenance and is extremely fast
Large LCD display for easy operation
Audio and Visual indication using speakers and LEDs
Up to 50 different time zone capability meaning you can create access for different people or groups of people at different times or days.
Can also be used in PIN only mode
Free easy to use Access Control software for managing the readers and
programming TimeZones, Groups and collecting logs (audit trails)
Can work independent of computer and you can also
download the logs and backup users on a USB flash drive
Multi Language display available on request
Storage: 30000 card holders and 50000 transactions
Read Range: 5‐10cm
Access Mode: Card only, PIN only and Card+PIN
Communication: RS 232, TCP/IP,USB out and Weigand
Out (Built in Serial and Ethernet ports) - all included!
Display : LCD display ( 16x 4 characters)
Temperature: 32°-105°F (0°-42°C) , Relative
Humidity: 10%‐90% - weatherproof. May be used inside or outside
Audible Indication: Built‐in buzzer
Voltage input: 12V DC.
Operating Current:400 mA
Housing: Rugged ABS enclosure with waterproof keypad
Relays: NO/NC contacts for lock, door sensor, exit button,
and alarm contact
One year, easy, no hassle warranty
3.75”(W) x 5.63”(H) x 1.5”(D)
See our electric strike and magnetic lock section
Heater kit for cold weather
See the book: The Guide to Electronic Locking Devices
Don't forget the power supply! Click here for power supply with battery back-up
Important! Please note: always use a separate power supply when using a proximity card reader and an electric strike or magnetic lock.
|Quick Start Guide |
|Users Guide |
|More Info On This Product|
|Download The ZK Attendance Management Software version 3.7.1 build 73|
|ZK Biometrics ISO Very Thin Proximity Cards (25 Cards)|
|ZK Extra Thin Proximity Card With Custom Printing (100 Cards)Send any image you want on your RFID cards that displays your LOGO or the intended use of the card and we will print them for you! We sell these in minimum quantities of 100.|
Disclaimer: All cards will have a resin thermal dye-sublimation image print that is extremely scratch resistant. We use a Fargo printer that will do a high quality color match to your artwork. However, due to the possible variation in color,resolution, and size we insist that ALL CARDS SOLD AS-IS. Your artwork image will be a closer match if you send your file in the ".PDF" format, but we will also accept ".JPG" format files. Please make sure your artwork image fits inside a 2"x 3.5" window and has been checked and approved. Please note that printed cards can not be returned.
|ZK Biometrics Proximity Fobs (25 Fobs)New smaller size.|
|ZK Biometrics Proximity Stickers (25 Stickers)Amazingly tiny! Only 3/4 inches in diameter. The proximity sticker can be affixed to existing cards such as existing mag-stripe or bar code so migration to proximity technology is easy and cost effective or any type of objects such as cell phones or laptops. Extra sticky tape on the back to stick to almost any flat surface.|
Up to 2" read range
Smaller than a US Nickel!
|ZK Extra Reader Proximity Reader OptionPlease note: this extra reader option is not available when you choose the HID 26 bit format with the primary ZK reader.|
Optional auxiliary reader for high security/extreme weather conditions. The reader without the number keys is the optional reader. They attach to each other by a cable. and can be placed as far as 300 feet apart. Sealed in a rugged,
weatherized enclosure designed to
withstand harsh environments. Another way to use this auxiliary reader would be if you want your audit trail to show incoming and out going traffic. The audit trail would be able to differentiate between the two.
Output: Wiegand 26bit/34bit, ABA
Standard Format Data Output
Response Time: Less than 0.2 second
Read Range: 5-10cm
Temperature: -15 to 65 degrees
Relative Humidity: 10%-
Visual Indication: Bicolor LED
Audible Indication: Built-in buzzer
Voltage: 5V-16V DC.
Operating Current:70 mA ( @ 12VDC)
Maximum Cable Length: 300ft (100m)
Housing: Rugged PVC material
Dimensions: 4.5 x 3 x 1 inches
Warranty: One year
|ELK 12 & 24 Volts One Amp Power Supply With Battery Backup Comes with a limited lifetime warranty.
Great to use to power a small one door access system with battery backup - includes metal case.|
|Weather Resistant Covers For Card Readers -Keypads -Fire Alarms|
We also accept Paypal for US orders
and now also international orders through our International Checkout.
We are proud to be
A top rated store!
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978
All rights reserved 1996-2020 The Keyless Lock Store™ and Nokey.com™