An inexpensive reader/keypad that can be accessed and updated and maintained by an authorized user from anywhere at anytime via the free net attendance software."

The iProx TCP54A Ethernet Embedded proximity access controller and software is a powerful offline solution for access control and time recording/attendance. It can accept up to 5000 ID cards or fobs (users) and store 50,000 transaction records. Transaction records in offline readers can be downloaded to net attendance software easily. Hence, reports can be gerearted accordingly. An electric strike can be connected. The strike will release the door lock by authorized cards. The state of the controller and card information can be uploaded by the net attendance software through the network. Access can be updated and maintained by an authorized user from anywhere at anytime via the net attendance software. Comes with 10 proximity cards and an RJ45 network connect cable (one meter long).

Relay output to control any elctric strike or magnetic lock

Use pin number or card or pin + card for entry

Embedded Ethernet (no more adapter or controller) plug directly into your network by CAT5 cable

Upload access table from any authorised PC in your network with Net Attendance software. Change and maintain by an authorized user from anywhere at anytime with the software.

Built-in FLASH memory for data protection (data will not be affected with power failure)

Standalone while computer is offline

Accept 5,000 ID cards

Store up to 50,000 transaction records

Single ACCESS PIN for entrance at any time

Eight Time zones for using with "ID card only" or "ID card + PIN"

Real Time Clock

Now comes with 10 free Proximity Cards and an RJ45 network connect cable (one meter long)


Please note that this reader is for indoor installations only.



Related Products
See our electric strike and magnetic lock section
Heater kit for cold weather
See the book: The Guide to Electronic Locking Devices

Don't forget the power supply! Click here for power supply with battery back-up

Important! Please note: always use a separate power supply when using a proximity card reader and an electric strike or magnetic lock.

3342