The DOMINO KEYLESS ENTRY SYSTEM is a simple and secure way to open and close garage doors. Consisting
of an outside permanently mounted keypad and inside control box, the DOMINO KEYLESS ENTRY SYSTEM
features a 1 to 6 digit user code, making the system as easy to program as it is to install.Features & Benefits:
-Compatible with all garage door openers.
-System is quickly programmed in three simple steps.
-keypad shuts off for one minute after five wrong entries have been pressed. Cutting the cable to the inside control box or
"shorting" the wires will not activate the opener
Weatherproof Cover Flip-up cover
-design protects the unit against the elements.
Personalized User Code
-A l through 6 digit code may be chosen, over 1,000,000 possibilities.
- Lighted keypad for easy nighttime operation. Additional indicator light provides verification as keys are pressed.
Low Power Warning/Battery Saver
- Lights dim to indicate batteries should be replaced soon. Special sleep circuitry conserves battery life.
-After code is entered and garage door opener is activated, the "enter" key may be pressed again to stop or reverse the
door, without re-entering the
Additional Push Button
- Conveniently located on control box.
Outside Keypad Size:
Length 5" (12.5cm); Width 2"
Depth .6" (1.5cm).
Inside Control Box Size:
Length 3" (7.5cm); Width 4.5"
Depth 1.4" (3.5cm).
ABS plastic; Elastomeric silicone
3 AA Duracel alkaline
1 amp dry contact relay. .3 – 3.5
Installation: Keypad-Two concealed #4 x 3/4" screws. Outside
keypad is wired to inside control box with
modular telephone cable and connector.
Installation: Control Box-Two #4 x 3/4" screws. Two low voltage
wires required to connect from control
box to wall push button or terminals on
1.At control box, slide program switch "ON"
2.At keypad, press "Enter," "your code" (up to six digits), and
3.At control box, slide program switch "OFF."
See also Domino keypad for electric strikes