S&G Titan Electronic Safe Lock (Lock And Keypad Set)

Advanced design, pivot bolt electronic safe lock. The PivotBolt™ is connected to its keypad only by cable. There’s no rigid spindle, so the lock does not have to be placed behind the keypad. It can be anywhere on the inside of the safe door. Reliable, secure motor actuated locking mechanism.

Pivoting bolt type

Lock bolt is retracted and extened by manually rotating the keypad bezel

One million codes to choose from

Field programmable (via keypad) for single control, and employee/manager modes; changeable at any time

Default operating mode is single control, but the lock can easily be set to a permanent dual control mode

One master code, one supervisor code, one time delay override code, seven user codes (eight user codes if time delay override is not enabled)

Factory programmed Management Reset Code can be changed to an MRC of your own choosing during the initial lock setup (MRC is not available if the lock is set to dual control mode)

Programmable time delay of one to ninety-nine minutes can easily be programmed and activated from the keypad

Time delay opening window can be set from one to fifteen minutes

Penalty lockout feature shuts the lock down for ten minutes if five or more incorrect codes are entered in a row to deter random code entry attempts

All programming is accomplished via the keypad; no special programming tools required

Deadlocking, motor-blocked bolt withstands over 225 lbs. of end and side pressure

; Uses S&G's "Magic Module" footprint to match the mounting dimensions of most mechanical and electronic locks

The Titan D-Drive can be mounted RH, LH, VU, and VD with no alterations

Low profile rotating keypad is only 1" (25.4 mm) high, and is 3 3/4" (9.5 cm) in diameter

Chrome finish