|
|
Indoor Keypad/Proximity Card ReaderThe new SK1131SPQ packs a tremendous number of features in a small package including 4 Available programmable access modes for all 3 outputs: card only, code only, card and common user code, card and unique user code.
Installation instructions For The SK1131SPQBuilt-in proximity reader. 125hHz (EM125)
4 Available programmable access modes for all 3 outputs: card only, code only, card and common user code, card and unique user code.
1,200 Users over 3 Outputs. Codes may be 4~8 digits:
- Output #1 – Form C relay, 1A@30VDC, 1,000 users
- Output #2 – Form C relay, 1A@30VDC, 100 users
- Output #3 – Transistor ground, 100mA@24VDC, 100 users
Super user code gives admin access to keypad.
Durable and attractive stainless steel faceplate.
Programmable lock out or duress output after 5~10 unsuccessful attempts to key in a code.
Relay output inhibit control.
Programmable egress input with optional warning alarm and delayed egress.
Built-in tamper (N.C.) circuit.
EEPROM memory prevents data loss.
Power: 12~24 VAC / VDC.
Illuminated keypad with programmable status LEDs.
Door-propped-open warning.
Alarm output triggers an optional alarm control panel if a protected door is forced open.
Optional door open alarm.
Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time.
Duress output signals a silent alarm if an authorized user is forced to open the door under duress.
Keypad active output activates for 10 seconds when any key on the keypad is pressed.
Visitor codes can be programmed for one time use or for a specific amount of time.
Real-time clock to auto-disable access at specific times.
Specifications
Operating voltage 12~24 VDC / VAC
Current draw (at 12VDC) Standby 66mA
Total max current draw 160mA
Outputs #1 – Form C 1A@30VDC
#2 – Form C 1A@30VDC
#3 – Transistor ground 100mA@24VDC
K or A 100mA@24VDC
Duress 100mA@24VDC
Interlock 100mA@24VDC
Tamper 50mA@24VDC
Inputs Egress N.O. Ground
Door sense N.C. Ground
Door inhibit N.O. Ground
Proximity reader frequency 125kHz (EM125)
Proximity reader sensing distance 1-1/2” (38mm)
Operating temperature -4°~158° F (-20°~70° C)
Operating humidity 5~95% Non-condensing
Dimensions (including back box) 4-5/8"x2-7/8"x1-1/2" (117x73x38 mm)
Weight 6-oz (170 grams)
Related Products
See our electric strike and magnetic lock section
See our heater kit for cold weather
See our popular electronic cabinet lock
See the book: The Guide to Electronic Locking Devices
Don't forget the power supply! Click here for power supply with battery back-up
Important! Please note: always use a separate power supply when using a proximity card reader and an electric strike or magnetic lock.
|
We also accept Paypal for US orders
and now also international orders through our International Checkout.
We are proud to be
A top rated store!
Phone:561 477-1864
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978
All rights reserved 1996-2020 The Keyless Lock Store™ and Nokey.com™ |
|
| | |