Trilogy Narrow Stile Keypad
Lock For Store Doors With
Proximiity Card Reader
And Audit Trail Feature
Aluminum door retrofit outside trim for Adam Rite(R) latch locks. Supports up to 2000 users - either pin number or proximity card or proximity fob (see options below)and includes 40K event audit trail and 500 event audit trail schedule. Keypad or PC programmable. See below for optional software and cable pack.
All-metal, vandal-resistant 12-button keypad supports 3-6 digit PIN codes, and multilevel user hierarchy
(master, manager, supervisor, basic users)
1 1/4 mortise cylinder included
Very compact and made especially for glass and aluminum type doors
Wide weatherproof operating range from -31 to 151ºF (-35 to 66C)
Timed passage mode
Non-handed, fully field-reversible
Includes 2 Lithium 3V batteries)
To be used with the following Adams Rite models:
1850, 1950, 4710, 4070, 4730, 4900 Series and
MS1850S and MS1950S Series latch locks.
14 3/8 inches H x 1 3/4 inches W x 1 5/8 inches D
Can be used with the following backsets: 31/32 and 1 1/8 and 1 1/2 inches
Finish: Brushed chrome
|Alarm Lock Trilogy Software & Cable Pack This item can be used only with the higher end Trilogy models.|
|HID Proximity Fobs in Lots Of 50The RF-programmable 1346 ProxKey® 111 proximity keyfob incorporates proximity technology into a convenient device approximately the size of an automotive key. Features • Offers universal compatibility with all HID proximity readers. • Provides an external number for easy identification and control. • Can be placed on a key ring for convenient entry. • Supports formats up to 85 bits, with over 137 billion codes. Proximity Fobs In Lots Of 50|
Proximity fobs in lots of 50
|HID Proximity Fobs in Lots Of 10Same as above but in lots of 10
The 10 pack is only available in the Napco 36 bit format.|
|HID Proximity Cards In Lots Of 100The RF-programmable 1326 ProxCard II proximity access
card is the industry choice for a cost-effective solution
to proximity access control.
• Offers universal compatibility with all HID proximity
• Provides durable packaging and consistent read
• Provides an external number for easy
identification and control.
• Supports formats up to 85 bits, with over 137
• A PVC overlay allows for on-site photo ID using
most direct image printers.
Proximity cards in lots of 100
3.375" x 2.125" x 0.070" max.
Please note: if your not sure which format you need please give us a call or email us before ordering.
|HID Proximity Cards Lots Of 25Order in lots of 25|
|HID Proximity Stickers For Trilogy Proximity Locks And Readers (In Lots Of 10)Adhesive Proximity Tag, Made of Lexan Plastic, Finish Black, Height 1 2/8 In, Width 1 2/8 In, Depth 6/8 In, Operating Temp Range -50 F to +160 F, For Use With Trilogy Proximity Locks and Readers. These stickers can stick to any card or flat surface.|
The 125 kHz, 26 Bit MicroProx Tag provides the convenience of HID’s proximity technology in a small disk-shaped transponder. Simply attach the adhesive-backed tag to any nonmetallic card .
The size of a coin, the tag easily attaches to all nonmetallic materials, including PVC cards.
Seamlessly upgrade from Wiegand, magnetic stripe or barium ferrite technologies by simply adhering the Tag to your existing access card.
Easily and cost-effectively turn a plastic ID badge or contact smart chip card into a proximity credential! Add proximity access control capability to users' cell phones, PDAs and other similar nonmetallic devices.