Elk Power Distribution
The Power Distribution Module conveniently converts a single AC or DC input into nine individual outputs to centrally power Video Cameras, PIRs, Photobeams, etc. Each output is protected with 250mA auto-resetting PTCs to protect any shorted output from disabling the other outputs.
The module has visual LED power indicators on each output and a Master Power On/Off Switch with LED on the input. The module requires a 6 to 30 volt AC or DC power source (not included) which connects either to a terminal block or a 2.1mm DC power jack located on the module. Outputs can be combined for more current.
Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
Master Power On/Off Switch.
Visual LED Power Indicators on Input and each Output.
Convenient Test Points for measuring Total Current Draw.
Lifetime Limited Warranty.
Paintable White Plastic
Max Current Draw: 250mA from each output
Max Combined Current Draw: Not to exceed Input Power Source or 2.3A.
Input/Output Voltage: 6 to 30 Volts AC or DC.
Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack.
Output Connection: Screw terminals (POS and NEG) for each output.
Enclosure Size: 6.5" x 4.3" x 2".
We also accept Paypal for US orders
and now also international orders through our International Checkout.
We are proud to be
A top rated store!
Phone: 561 479-0498 or Fax: 561 488-7963
Have a question or comment? e-mail us!
We look forward to hearing from you!
In This Business Since 1978
All rights reserved 1996-2018 The Keyless Lock Store™ and Nokey.com™